Ingco Dust Mask / Face Mask / Safety Mask (NON-MEDICAL) HDM08


In stock


  • Complies with standard: 149: 2001 CE0121
  • Class: FFP2
  • Includes Activated Carbon Fiber
  • Maximum Humidity: 70%
  • Temperature Range: +38°C
  • Applications: Protection against organic vapors and ozone. For acetylene and electric welding, oxycut, grinding with exhalation valve.
  • Directions for use:
  • Place the mask over your mouth. The seal of the respirator must be checked before entering the work area.
  • Wear the mask at all times when in a contaminated area. Do not remove.
  • After leaving the contaminated area remove the mask and discard. In the event any breathing diffculty occurs due to colging, replace mask with a new one.
  • Use the mask according to the required occupational health and safety acts and procedures.
  • This product is designed to be used once only. Once removed form the face it should be discarded.
  • In the event you may feel unwell or droughsy, leave the area you are working in immediately.
  • Store the masks when not in use in dust, moisture and contaminant free area.
  • Store in an area theat temperature dose not less than +5 and +38 grade C.
  • Limitations Do not enter areas where the following applicable
  • Oxygen concentration is less than 17% (VK-19%)
  • Contaminants or their concentrations are unknown. Particulate concentrations exceed levels fixed by applicable health and safety regulations or protection factor x NPF-whichever is lower.

Payment & Security

You may also like

Recently Viewed Item